How We Paint The Inside Of Your Home
Walls, ceilings, trim, doors and built-ins
A good interior paint job is mostly decided before the first coat. Modern Coat Painting spends real time on protection, patching and sanding, because that's what separates a wall that looks fine from across the room from one that still looks clean when you're standing next to it.
We paint single rooms, whole floors and finished basements around Mooresville and the Charlotte area. Soft whites, greige and bold high-gloss color are all part of the work.
Have a interior painting project in mind? Call or text (516) 424-5119 and tell us which rooms you want painted. We will set up a time to walk through them with you.
What We Paint
Most interior jobs include more than the walls. Here's what we usually cover in a room, and you can pick any mix of it.

Walls And Ceilings
Living rooms, bedrooms, kitchens, hallways and stairwells. Ceilings get cut in cleanly along the crown or the wall line so you don't see a wavy edge.
Darker and brighter colors take more coats to cover evenly. We'll tell you up front if your color needs an extra one.

Trim, Doors And Crown Molding
Baseboards, door and window casing, doors, crown molding, wainscot and board-and-batten. Ornate crown with deep carving gets worked into every recess so the paint doesn't pool or leave bare spots in the detail.

Built-Ins, Benches And Shelving
Bookcases, window seats, mudroom benches and mantels. These are usually sprayed after the room is wrapped in plastic, which gives a smooth, even finish on all the edges and inside corners.

Prep And Protection
On the first day we move what needs moving, lay down floor protection and tape the edges. Windows, outlets, light fixtures and anything staying in the room get masked off. Stairs get taped tread by tread when the rails or risers are being painted.
Then the walls get fixed. Nail holes, dents and hairline cracks are filled, sanded smooth and spot-primed so the patch doesn't flash through the new color. It's slow, and you'd notice right away if we skipped it.
Sheens And High-Gloss Color
Flat and matte hide small flaws on ceilings and walls. Eggshell and satin are easier to wipe down in kitchens and hallways. Semi-gloss is the usual pick for trim and doors.
High gloss is its own thing. We've done whole rooms, paneling and built-ins in deep orange, red and teal gloss, and that finish shows every bump underneath it. Those jobs get extra sanding between coats and a sprayed final coat so the surface reads like glass.
Clean-Up And The Final Walkthrough
We pick up at the end of each day so you can still use the house. When the last coat is dry, the tape and floor covering come up, furniture goes back and we walk the rooms with you. Anything you point out gets touched up before we leave.
Interior Painting Questions
Do I need to move my furniture before you paint?
No. Small items and things on the walls are easier if you put them away, but we move and cover the furniture ourselves and put it back when we're done.
Can you paint just the trim or just the ceilings?
Yes. Trim-only and ceiling-only jobs are common, especially when the walls were done recently or the trim has yellowed.
How many coats will my walls need?
Two finish coats is the usual plan. A big color change, a bright color over a dark one or fresh patches can need a primer coat or a third coat, and we'll tell you that when we look at the room.
Can you do high-gloss walls or paneling?
Yes. High gloss is one of our favorite finishes, and you can see examples on our projects page. It needs very smooth walls, so plan on extra sanding and prep time.
Do you paint finished basements?
We do. Basement walls, ceilings, columns, doors and trim are all part of the job, and new basements usually need priming first.







